FRP Fiberglass Boat Body Yacht Shell

FRP fiberglass boat body yacht shell

Composite materials are widely used in marine areas such as boat hulls

It turns to be thebest solution in material selectionof aquatic product benefit fromitsgood performance of
lightweight,high strength, corrosion resistance, anti-marine adhesion, can absorb high energy, good impact
toughness, low thermal
conductivity, good insulation, easy maintenanceand long service life.

Scope of application: hull shell, yacht interior, water jet ski and other aquatic products.

Main Products:

Fiberglass(FRP) Hand Lay Up Products,Fiberglass(FRP) Compssion Molding Products,Fiberglass(FRP) RTM Products,Fiberglass(FRP) SMC Products,Fiberglass(FRP) BMC products

Describtion:

1st:Mould treatment:
Polish:Mouldmust be polished before productionwhichwill guarantee the good and solidified surface
Clean:Special detergent are used to get thedust away from the mouldwhichwill make no dark markings in the
gel coat surface.
Release agent: This will be brushed on themould to make ejectioneasily.

2ndFiberglass andresin:
Gel coat:The colorof productsis decided by the gel coat,with thickness of about 0.3-0.5mm. UV resistant can
be added.
Surface mat:This is to avoid the air bubble on the surface, and also make fiberglass matinvisible from thefinished
surface.
Fiberglass mat:Normally we use 300g/m2(0.6mm thickness)and 450g/m2(0.9mm thickness). Accordingtoyour
requests on the thickness and strength,we will calculate how many layers of fiberglass mat should be used.


3rd
Solidify:The time required for solidifying depends on thickness and weather condition.Normally 24 hoursfor one
piece to solidify to avoid any deformation after demoulding.
Demould:After solidified, the product will be demoulded
Cut and trim:We will mark the trim line and hole positions on the mould,then trim according to the marks to
gaurantee the mounting dimensions



4th Adhesion: Professional mould and Temperature and worker

5th Surface treatment :

6th Painting

7th Package Solution:
Our principle: Safe and economical
We choose economical packaging on condition that there will be no
damage during transportation.
Shipping: We are very glad to get the freight cost information for you
as we have long term cooperated forwarder
company.










8th Quality Control of working :
Technical document
as following Testing history data







Qingdao Lanmon Industrial Co., Ltd. was established in 2006, is located in Huangdao District of Qingdao
Yuanjiazhuang community. Covers an area of 11,000 square meters,with registered capital of 10 million yuan.
Specializing in theresearching and manufacturingof hand lay-up composite materials (FRP),SMC composite
materials (FRP) BMC composite materials and other products which used in rail transportation,vehicles and other
fields.Our company is a production enterprise integrating R & D, design, manufacture and sales.

We have 10 years experienceof FRP complete production process, from mouldingto painted end product, and
the quality of our products arewellcontrolledwith professional QC engineer. Our productshas won the trust
and favorof customers at home and abroad.
·
Mission: Extensive use of composite materials technology to protect our home environment