Fiberglass Car Cover/ Buts Cover/ Bus Pare Parts

When compositematerial be used in commercial vehicles,it will need to meetspecific customer's requirements with
composite appearance, aerodynamics, durability and weight reduction. New process improvements, such as advanced
p-carbon fiber and alternative resin technologiesjoin in, helping toreduceweight and strength.
In addition to basic composite fabrication, we provide internal installations including assembly parts for cabling and
wiring, insulation, cabinets, lighting and trim panels. Fully meet customer'srequirements.
Scope of application: truck and bus shell, interior, car bucket, shroud and so on




Fiberglass auto parts frp car parts grp automotive parts
fiberglass auto parts

frp car parts
grp automative parts

Main Products:

Fiberglass(FRP) Hand Lay Up Products,Fiberglass(FRP) Compssion Molding Products,Fiberglass(FRP) RTM Products,Fiberglass(FRP) SMC Products,Fiberglass(FRP) BMC products

Describtion:

1st:

Mould treatment:
Polish:Moulds must be polished before production. This will guarantee the good and solidified surface
Clean:Special detergent are used to get thedust away from the mould. This will make no dark markings in the
gel coat surface.
Release agent: This will be brushed on the
mould to make demoulding easily

2nd
Fiberglass andresin:
Gel coat:The color is decided by the gel coat,with thickness of about 0.3-0.5mm. UV resistant can be added.
Surface mat:This is to avoid the air bubble on the surface, and also make fiberglass mat invisible from the
finished surface.
Fiberglass mat:Normally we use 300g/m2(0.6mm thickness)and 450g/m2(0.9mm thickness). Accordig to
your requests on the thickness and strength, we will calculate how
many layers of fiberglass mat should be used


3rd
Solidify:The time required for solidifying depends on thickness and weather condition.Normally 24 hours
for one piece to solidify to avoid any deformation after demoulding.
Demould:After solidified, the product will be demoulded
Cut and trim:We will mark the trim line and
hole positions on the mould,then trim
according to the marks to gaurantee the
mounting dimensions


4th Adhesion: Professional mould and Temperature and worker


5th Surface treatment :

6th Painting





7th Package Solution:
Our principle: Safe and economical
We choose economical packaging on condition that there will be no damage during transportation.
Shipping: We are very glad to get the freight cost information for you as we have forwarders which have been
cooperated for a long time.






8th Quality Control of working :

Technical document as following Testing history data












Why choose us & FAQ :
Q1: How is the quality of your products made via hand lay up process?
A: More than 90 percent workers have been working in our factory for over 8 years, which ensures the continued
stability of our production,quality management, research and development,especially for hand lay up products.
This will save cost for you and provide you with competitive
products. We are pround of our quality of the solidified gel-coat surface, which is highly spoken by our
customers.

Q2: Which market have you exported your products to?
A: Europe, North America, Australia, New Zealand, Middle East. The products are applied as auto parts,
motorcycle parts, construction parts, public facilities(like telephone booth), marine parts, industrial machine
parts, household parts, etc. This makes us know well about the request from these market and product. For
example : our products were applied on the CNR ,CRH ,Siemens etc.
Q3: Which process is suitable for my products?
A: Please just send your product details to us and our engineer will evaluate for you, based on your annual
quantity, product structure, your detailed request, etc.
Q4: How far is your factory from the airport?
It's about 100km from Qingdao Airport to our factory. We are warmly welcome you to visit us for knowing
our capability and our production lines.







Qingdao Lanmon Industrial Co., Ltd. was established in 2006, is located in Huangdao District of Qingdao
Yuanjiazhuang community. Covers an area of 11,000 square meters, construction area of 8,000 square meters,
a registered capital of 10 million yuan. Specializing in the production of hand lay-up composite materials (FRP),
SMC composite materials (FRP) BMC composite materials and other products used in rail transportation,
vehicles and other fields has been engineering vehicles, the company and the Capital FRP Research and
Design
Institute, China University of Petroleum, Shandong University of Science and Technology More than a dozen
research institutes and tertiary institutions have long-term cooperative relations, strong technical force, is a
design research and development, production, sales and service in one of the science and technology
enterprises.


Qingdao Lanmon Industrial Co., Ltd., production and export of glass fiber reinforced plastic products more than
10 years of experience, mature hand-paste molding process, the quality of our products have been well
controlled, has won the trust of customers at home and abroad and favor. Products are high-speed rail car
interior;automotive shell; construction machinery and medical machinery shell; FRP crafts molds; FRP furniture.

Located in Jiaonan, west of Jiaozhou Bay, Qingdao Lanmon Industrial Co., Ltd is adjacent to Economic and
Technological Development Zone and close to International Airport Qingdao Liuting Airport and Qingdao
Qianwan Port. It enjoys a convenient geographical location with convenient land, sea and air transport.

·
Mission: Extensive use of composite materials technology to protect our home environment