Brima specialize in manufacturing BMG electric chain hoist, Europe type wire rope hoist, BM electric chain hoist, Crane geared motor, End carriage ,Manual chain hoist.
Brima brand products include&co
lon;
* BMG electric chain hoist from 125kg to 1ton
* Europe type wire rope hoist from 3.2ton to 80 ton
* BM electric chain hoist from 250 kg to 50ton
* Crane geared motor
* End carriage
* Manual chain hoist
Features of electric chain hoist &co
lon;
1.Shell
It is made of light aluminum shell, light but hard. The cooling fin is specially designed to ensure quick heat dissipation with the rate up to 40% and co
ntinuous service. The integral enclosed structure is applicable to place like chemical plant and electroplate factory.
2.The Electromagnetic Brake
Electromagnetic brake is featured by its unique brake design.It immediately operates when power cuts off.
3.The Mechanical Load Bake
The limit switch device is installed wher
e the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety.
4.Chain
The hook is co
nstructed of anti-pull and heat-treated steel and heat-treated steel and meets required standards.The lower-hook can turn 360 degree ;its to
ngue provides guarantee for safety.
5.Hook and safety tongue
It is hot forging with perfect strength that is hard to break.The operation safety of the lower hook is ensured by its 360 degrees rotation and safety to
ngue piece6.Support f
rame
The loading support f
rame co
nsists of two steel plates,which is extremely stury.
7.Transformer
24V/36V transformer device .The device is used to prohibit unexpected accidents caused by electric leakage and guarantees the safe uses while raining.
8. Electromagnetic contactor
Electromagnetic co
ntactor can be used safely under high frequency.
9.The back-phase protect
The back-phase protects the motor from overheating in the case of wrong phase position.
10. Limit switch
The power will cut off automatically when the hoist ascends to its limit.
11.The emergency-stop switch (if selected)
This switch is used to stop the hoist in the an emergency. The red and mushroom-shaped switch is located on the top of the switch controller.
When pssed and held down, the power will be cut off and the switch be locked.A clockwise-turn can unlock it and restart the hoist.
12. Customized service&co
lon;
We can provide not o
nly amazing products,but also special o
nes designed at requests.We'll do our best to meet the need of customers.
Technical specifications(Single speed)&co
lon;
| Model | BM |
| 03-01S |
| Capacity(t) | 3 |
| Lifting speed(m/min) | 5.4 |
| Motor power(kw) | 3.0 |
| Rotation speed(r/min) | 1440 |
| Insulation grade | F |
| Phase | 3 phases |
| Power supply | 220V to 690V / 50HZ or 60HZ |
| Control voltage | 24V/36V/48V |
| No. of load chain | 1 |
| Spec.of load chain | 11.2 |
| Net weight(kg) | 122 |
Technical specifications(Dual speed)&co
lon;
| Model | BM |
| 03-01D |
| Capacity(t) | 3 |
| Lifting speed(m/min) | 5.4/1.8 |
| Motor power(kw) | 3.0/1.0 |
| Rotation speed(r/min) | 2880/960 |
| Insulation grade | F |
| Phase | 3P |
| Power supply | 220V to 690V / 50HZ or 60HZ |
| Control voltage | 24V/36V/48V |
| No. of load chain | 1 |
| Spec.of load chain | 11.2 |
| Net weight(kg) | 159 |
1 YRS
